Floren Floor supplied wood-look SPC wall panels for a hospital construction project in Prek Pnov, Phnom Penh, Cambodia. The panels were installed extensively in hospital rooms, corridors and connecting interior areas.

This project required a consistent wall finish across multiple spaces. During installation, the construction team checked panel alignment, joints, doorway details and the connection between the panels and the prepared wall structure.

Project Information

• Project location: Prek Pnov, Phnom Penh, Cambodia

• Project type: Hospital interior construction

• Product: Wood-look SPC wall panels

• Main applications: Hospital rooms, corridors and interior wall areas

• Project stage shown: On-site wall panel installation

SPC Wall Panels for Hospital Rooms and Corridors

Hospital construction projects often include many rooms, passageways, door openings and connecting walls. Using the same wall panel design across these areas can help the contractor maintain a coordinated interior appearance.

For this project, light wood-look SPC wall panels were selected for large interior wall areas. The neutral surface works with different room layouts and creates a consistent finish between patient rooms, corridors and other shared spaces.

Before a similar project begins, buyers and contractors should confirm the panel dimensions, surface design, color code, installation structure, edge treatment, required quantity and delivery schedule.

On-Site SPC Wall Panel Installation

The project photos show the panels being fitted onto a prepared wall framework. The installation team checked the position of each panel before completing the surrounding wall area.

Important installation points for a large commercial wall panel project include:

• Checking the wall condition before installation

• Confirming the spacing and alignment of the supporting structure

• Keeping panel joints straight and visually consistent

• Planning cuts around doors, corners and service openings

• Protecting installed panels during other construction work

• Keeping approved samples available for color and surface comparison

The exact installation method should be confirmed according to the panel structure, wall condition, project drawings and contractor requirements.

Doorways, Corners and Wall Transitions

Door openings and corners require more preparation than uninterrupted wall areas. Panels may need to be measured and cut on site so that the joints remain aligned with the surrounding installation.

For hospital rooms and corridors, the contractor should confirm doorway dimensions, corner details, ceiling connections, skirting positions and access points before final cutting. This reduces unnecessary material loss and helps the installation team maintain a consistent finish.

Color and Batch Confirmation for Large Projects

When SPC wall panels are used across many rooms or corridors, color and batch planning becomes important. Physical samples should be approved before bulk production, especially when one design will be installed throughout several construction zones.

Project buyers should record the approved color code, surface texture, panel dimensions, quantity and packaging requirements in the order confirmation. Panels for connected areas can also be allocated by installation zone to simplify on-site distribution.

SPC Wall Panel Supply for Commercial Projects

Floren Floor supports overseas contractors, importers, distributors and project buyers with SPC wall panel selection and bulk-order coordination. Available support can include sample confirmation, color selection, quantity planning, production follow-up, export packaging and shipment preparation.

For an accurate quotation, buyers can provide the project location, application, wall dimensions, preferred surface design, panel specification, estimated quantity and purchasing schedule. If the final specification has not been confirmed, our team can review the available project information before recommending suitable options.

Frequently Asked Questions

Can SPC wall panels be used in hospital rooms and corridors?

SPC wall panels can be considered for hospital rooms, corridors and other interior wall areas, subject to the project design, installation conditions and local building requirements. The buyer should confirm all required technical and regulatory standards before ordering.

What information is required for an SPC wall panel quotation?

Please provide the project location, wall area or dimensions, preferred design, panel specification, estimated quantity, installation requirements and purchasing schedule.

Should buyers approve a physical sample before bulk production?

Yes. A physical sample helps the buyer confirm the color, surface texture, panel dimensions and overall appearance before placing a bulk order.

How should SPC wall panel quantities be calculated?

The calculation should include the measured wall area, door and window openings, cutting requirements and an appropriate installation allowance. The final quantity should be checked against the construction drawings.

Can different production batches have visual differences?

Minor differences may occur between production batches. For connected rooms or corridors, purchasing the required quantity in one confirmed order can make batch planning easier.

Does Floren Floor provide installation services?

The available service scope depends on the project. Floren Floor can discuss product selection, samples, specifications, packaging and shipment preparation. On-site installation arrangements should be confirmed separately.